Explorer Trike 2in1 (630-XXX)
Click here to download the Manual in PDF format. Available in all languages.
Please carefully read the instructions before assembling and using the product. Keep the instructions for future reference.
Be careful when unpacking and assembling the product.
Not to be used by children over age of 5 years due to size limitation.
Tricycle mode: Intended for children 10 months to 36 months.
Walking bike mode: Intended for children 2 - 5 years.
Maximum child’s weight: 44 lbs. (20kg)
Do not step or stand on back of frame which will cause product overturned.
Tricycle mode: Not to be used by children over 36 months; insufficient strength to support.
This product must be assembled by a responsible adult.
Remove all the parts which are not necessary for play before giving the product to your child.
How to assemble EXPLORER TRIKE 2in1
-
The front wheel’s fork needs to be aligned with the frame of the trike; then insert the stem of the front wheel’s fork into the frame.
-
Take the handlebars and align them with the front wheel by making sure the stem of the front wheel’s fork slots into the handlebars’ column. Make sure the handlebars are placed in the correct direction with the top column facing outwards, away from the seat. Push the handlebars down until you hear a click to securely fix them in place.
-
Turn the pedal locks of the front wheel in the direction of the unlocked symbol; place the pedals in the front wheel’s slots. Turn the pedal lock in the direction of the locked symbol to secure the pedals in the front wheel. You may need to hold the opposite pedal lock to ensure that the pedal doesn’t spin freely.
-
To install the rear wheels, you need to unscrew the knob at the end of the wheel assembly. The brakes of the rear wheels must be pointing inward when they are installed for all trike stages. Place the wheel in the hexagonal slot at the rear of the trike frame and ensure that the brake is upwards and doesn’t touch the ground. Once the wheel is in the correct position, you need to re-screw the knob back into the wheel slot to ensure the wheel will remain securely in place.
-
To insert the saddle, you must first open the clamp and press the bottom spring-loaded button on the saddle stem. Then, push the saddle down until you hear a click. Close the clamp. The saddle is adjustable with 2 available heights (31cm; 34cm). The minimum insertion depth is where “MAX” is marked on the stem when placing the top spring-loaded button in the saddle’s stem hole. This is the highest height of the saddle. The maximum insertion of the saddle is pushing the saddle down until the saddle’s stem is all the way down. This is the lowest height of the saddle.
Transform Training Trike to Balance Bike
- Unscrew the knob at the end of the wheel assembly. Place the wheel inside of the Trike frame. Slide the wheel in the hexagon shaped hole and screw back the knob onto the wheel. Repeat the procedure for the other wheel. Make sure the brakes do not touch the ground.
- Put the pedal lock of the front wheel in the unlocked position.
Remove the pedals from the wheel; you can store them at the rear of
the saddle.
- Warning! Protective equipment should be worn. Not to be used in traffic. Always wear safety equipment (helmet, elbow-pads, kneepads, gloves).
- Braking for walking bike: The product can be braked with the feet. The child can stop moving by stopping walking/running. Please take care that your child can always stop from the speed it produces and wears appropriate shoes
General instructions of use:
- Prior to use, make sure that the product has been assembled properly. Check all the connection elements: steering column; footrest; seat; safety belt; safety ring must be correctly adjusted and make sure that the locking mechanisms are securely locked. Check the product before the child rides to determine if there are any potentially hazardous parts or conditions.
- Children should be supervised by adult while riding this product. Special care should be taken to instruct children in safe riding.
- Do not use on the public highways, examples of safe riding area: To be used on flat and no gravel areas (playground, Public Square)
- Do not use this product near a staircase, on a slope, on a road or on a wet surface.
- More mobility child grows; the more potential hazards increase. At home, be sure to remove frames or mirrors hung too low and could break, and any object that could fall in the event of impact. Corner table can also be a danger.
- Do not allow more than one rider on the product at a time.
- Be sure the child wears clothes and appropriate footwear when using product.
- Be sure the rider keeps both hands on the handlebars for proper control.
- Do not allow the rider to wear anything that obstructs hearing and visibility, or which impairs the functioning of product.
- The product should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties.
Maintenance and security:
- Security checks: check periodically the product to identify any loose or dislocated element particularly the wheels, pedals, seat and handlebars.
- Periodic cleaning will bring a good life. Wipe the product with a dry cloth if it has been soiled.
- Regularly check the condition of abrasion and avulsion.
- Regularly check that parts are not broken or damaged, if this happens, stop using this product.
- Regular checks can prevent an accident.
Warranty
The manufacturer warranties this product to be free of manufacturing defects for period of 2 years from the date of purchase. This limited warranty does not cover normal wear and tear, tire, tube or cables, or any damage, failure or loss caused by improper assembly, maintenance, or storage.
This limited warranty will be void if the product is ever:
- used in a manner other than for recreation or transportation;
- modified in any way;
- rented
The manufacturer is not liable for incidental or consequential loss or damage due directly or indirectly to the use of this product.
Globber does not offer an extended warranty. If you have purchased an extended warranty, it must be honoured by the store at which it was purchased.
For your records, save your original sales receipt with the physical manual and write the product name below.
Additional info
For questions and inquiries please contact us through the contact form.